Irrigation

Irrigation Steps

1. Cut your riser tube to the height of the wall.
2. Cut your drip line to the width of the wall.
3. Install your dripline every second row of pods.
4. Add your drip line joiners, making sure the drip emitters is centred over each pod.
5. Punch holes in riser tube for the dripline.
6. Attach your drip line to your riser tube, cable tie riser tube to spare clip holes on plates.
7. plug in you end plugs to your drip line and riser, attach riser to tap and irrigation controller.
8. program timer and let it grow!